Size 8.75 in.W, 12.5 in. D, 4 in .H
Weight 10 lb
Cooling Forced air is provided by 2 internal fans
A minimum of 3 inches clearance front and rear are required for adequate air flow
- A mix of batteries may be processed by CASP with the CDC-65 attached even if some do not require the discharge booster.
- CASP will automatically switch the CDC-65 booster in or out of the circuit as required to reach the programmed discharge current
- Each current level, either 2, 4, or 6 Amps, is selected by plugging a specific cable into one of CASPs output connectors
- Each CDC-65 is supplied with 3 cables clearly marked for current level and equipped with appropriate connectors
- CASP units will recognize the presence of the CDC-65 and use the extra discharge capacity when needed
- By using CDC-65 with CASP, cycle times of analyze and discharge processes of larger batteries can be reduced significantly
Mechanical
Electrical - Input
Input Power Voltage 90-135 VAC or 180-265 VAC (manually selected)
Frequency 47 to 63 Hz
Current 0.5 Amps
Electrical - Output
2, 4, or 6 Amps Constant Current Discharge
Electrical - Displays
None
Environmental
Non-Operating:
Altitude 0 to 40,000 ft
Temperature -40 to 75°C
Relative Humidity 95% max.
Shock 20 g
Vibration 2 g
Operating:
Altitude 0 to 10,000 ft
Temperature 0 to 50°C
Relative Humidity 95% max.
Shock 20 g
Vibration 2 g
Controls and Indicators
LED Power-On Indicator